DR 400 update

Jet-Pack (IPACS) · August 23, 2018 at 3:13 PM Official Post

Hello everyone,

we've updated the DR400 aircraft workshop:

File

Aircraft Workshop DR400

This Aircraft Workshop includes the DR400 airplane with all source files.

Marc Borchers

June 25, 2019 at 11:50 AM

as well as the SDK tools, which you'll need as well:

The content cannot be displayed because it is no longer available.

The wiki tutorial https://www.aerofly.com/dokuwiki/doku.…rcraft:tutorial describes how to download and install the aircraft SDK and how to convert the DR400 aircraft. After completing just a few steps you have an additional aircraft in Aerofly, for free.

If you have any issues, you can report them in this thread.

Have fun, Jan

edpatino · August 23, 2018 at 3:52 PM

Thanks, Jan, much appreciated.

Checked the existing repaints (from flight-sim.org) and they all seem to work well.

I'm noticing a prop issue with the DR400 default HB-JOA wou should probably look close: the prop textures are wrong and the aircraft registration is not shown on the selection screen. Within the simulator all is working well, as far as I've tested.

Cheers, Ed

Jet-Pack (IPACS) · August 23, 2018 at 3:58 PM Official Post

Just try it out, I guess they are compatible still but I haven't tested it out.

NFelix · August 23, 2018 at 4:07 PM

Thanks.

It seems to be working ok, but in the aicraft selection menu, it appears like this...

NFelix · August 23, 2018 at 4:12 PM

Ok, i guess i was using the old SDK aircraft converter. I will try the new one.

My bad...

NFelix · August 23, 2018 at 4:18 PM

Well, I tried with the new converter, and it's having the same problem after all...

edpatino · August 23, 2018 at 4:20 PM

Quote from NFelix

Well, I tried with the new converter, and it's having the same problem after all...

It's the same.

Cheers, Ed

drhotwing1 (IPACS) · August 23, 2018 at 4:22 PM Official Post

Did you guys happen to 'mod' the DR400 prior to this to get it to work?

Have you tried to completely delete the old DR400 folder and remake it with this new update?

edpatino · August 23, 2018 at 4:23 PM

Quote from drhotwing1

Did you guys happen to 'mod' the DR400 prior to this to get it to work?

Have you tried to completely delete the old DR400 folder and remake it with this new update?

Done, deleted previously everything related to the DR400.

Cheers, Ed

drhotwing1 (IPACS) · August 23, 2018 at 4:24 PM Official Post

Quote from edpatino

Done, deleted previously everything related to the DR400.

Cheers, Ed

And you are still seeing this error? Even after completely uninstalling the SDK, installing the new SDK, deleting the DR400 folder, and re-running the process using the new SDK?

edpatino · August 23, 2018 at 4:28 PM

Yes, the prop textures in the default HB-JOA are wrong and the registration is not shown.

Do we need to download and install again the aircraft's SDK (the SDK tools files, not the file posted by Jan).?

Cheers, Ed

edpatino · August 23, 2018 at 4:33 PM

Quote from drhotwing1

Even after completely uninstalling the SDK, installing the new SDK

Could you pls tell which SDK are you refering to?. The only one SDKs are the Aircraft Workshop DR400 and the SDK Tool?.

Cheers, Ed

NFelix · August 23, 2018 at 4:33 PM

Quote from drhotwing1

And you are still seeing this error? Even after completely uninstalling the SDK, installing the new SDK, deleting the DR400 folder, and re-running the process using the new SDK?

Yes, that's what i did, this last time, and it's the same...

Not a big problem, when i'm flying it appears correctly, it's just on the menu...

drhotwing1 (IPACS) · August 23, 2018 at 4:35 PM Official Post

Quote from edpatino

Could you pls tell which SDK are you refering to?. The only one SDKs are the Aircraft Workshop DR400 and the SDK Tool?.

Cheers, Ed

Yes, you need to download the new SDK, uninstall the aircraft converter, reinstall the aircraft converter, and rerun the DR400 conversion using the new SDK

J van E · August 23, 2018 at 4:35 PM

Quote from NFelix

Not a big problem, when i'm flying it appears correctly, it's just on the menu...

Ah, good to know, you got me worried there. I'll be installing this plane this evening! Must be great for low flights over South Florida and TrueEarth Netherlands!

edpatino · August 23, 2018 at 4:48 PM

Quote from drhotwing1

Yes, you need to download the new SDK, uninstall the aircraft converter, reinstall the aircraft converter, and rerun the DR400 conversion using the new SDK

Ok, now it's fine. Thanks for your help!. The registration HB-JOA is still not shown in the menu description, but that's a minor thing.

Cheers, Ed

drhotwing1 (IPACS) · August 23, 2018 at 4:52 PM Official Post

Quote from edpatino

Ok, now it's fine. Thanks for your help!. The registration HB-JOA is still not shown in the menu description, but that's a minor thing.

Cheers, Ed

I just want to confirm here, is the prop displayed properly now?

Jetjockey10 · August 23, 2018 at 4:53 PM

Quote from drhotwing1

Yes, you need to download the new SDK, uninstall the aircraft converter, reinstall the aircraft converter, and rerun the DR400 conversion using the new SDK

Jeff,

I am confused, as normal. Is the SDK Tools and SDK the same file?

I have downloaded the SDK Tools and the Aircraft Workshop DR400 and unzipped them. Next I need to deleted the old DR400 and delete the existing Aircraft Converter program?

Regards,

Ray

edpatino · August 23, 2018 at 5:05 PM

Quote from drhotwing1

I just want to confirm here, is the prop displayed properly now?

Prop is displayed Ok in the aircraft selection menu. In-sim it was always Ok.

Thanks again.

Cheers, Ed

drhotwing1 (IPACS) · August 23, 2018 at 5:11 PM Official Post

Quote from Jetjockey10

Jeff,

I am confused, as normal. Is the SDK Tools and SDK the same file?

I have downloaded the SDK Tools and the Aircraft Workshop DR400 and unzipped them. Next I need to deleted the old DR400 and delete the existing Aircraft Converter program?

Regards,

Ray

You need to fully uninstall the old aircraft converter and install the new one from the download site. You will also need the new SDK Tools to rebuild the DR400

DR 400 update

Aircraft Workshop DR400

Similar Threads

Let's do Bavaria - and a bit more

No Sound

Cessna sounds

Building a plane?

Update 2.01.05.31 ( 20180724) - ORBX Saanen no longer working

Today's update

Tags