I've always felt the original Aerofly 172 was somewhat lightweight. Recently, I started playing with the .tmd file, and was able to increase weight to the maximum (2550 lb), adding weight to fuselage and wings (106kg to fuselage and 32,5kg on each wing, representing a full load of 52gals). I'm very pleased, as it flies more similar to how I fly the real 172. However I still believe the Aerofly 172 has a much lower glide ratio compared to the real one, especially with full flaps (I'm comparing to a 172sp, not the old ones with 40° flaps). I would really like to find a way to change it, as it makes approaches, especially circuits, considerable less realistic (e.g. if you are too high on the glidepath, on Aerofly, you just add full flaps and you're all set, while the real one requires more discipline to manage energy), the same applies for flaring, the real one likes to float on the runway, while the Aerofly one drops like a brick. I fly Aerofly in VR always before flying in real life, and the difference in glide performance is very noticeable.
Is there any parameter(s) to alter this behavior? Thank you!