User Tools

Site Tools


manual:graphics2

Customizing Your Graphics Settings

The Graphics Quality setting can provide you with specific pre defined quality settings (Low, Medium, High, Ultra), or allow for you to customize your settings field by field (Custom) To enable the individual graphics settings click on “custom”, this will enable the next five settings. Note: Use the (Insane) shadow setting with caution as it will impact performance. Recommended GPU 1080 or higher.

System Requirements

Minimum

OS: Windows 7, Windows 8, Windows 10 (64 Bit Required) Processor: Intel Dual core CPU 2.4 GHz Memory: 4 GB RAM Graphics: OpenGL 3.0 compatible 3D graphic card with at least 1 GB of RAM Storage: 35 GB available space Sound Card: DirectX Compatible soundcard

OS: Windows 10 (64 Bit Required) Processor: Intel Core i7 CPU 3.0 GHz Memory: 16 GB RAM Graphics: NVidia 980 GTX Storage: 107 GB available space Sound Card: DirectX Compatible soundcard

In most circumstances you should achieve framerates over 100 in configurations that meet the recommended system requirements.

Systems: Quality Vs. Performance in VR Guide

Want ULTRA quality settings, with smooth performance, in VR? Look no further. Through testing and user feedback we put together some scenarios to help you make an informed decision. AeroFly FS 2 in VR provides you some amazing visuals but you will need the horsepower to run it smoothly.

VR: Recommended Configuration for ULTRA Settings

OS: Windows 8, 10 64 Bit Processor: Intel Core i7 CPU 3.0 GHz Memory: 16 GB RAM Graphics: NVidia 980 GTX (Latest Driver Version Required) Render Scale Factor: 1.25 Note: - This setting can be found under Settings/Virtual Reality Limit Frame Rate: VSync OFF Note: This setting can be found under Settings/Graphic Settings Oculus Rift or HTC Vive.

Note - If stuttering occurs in densely populated areas, reducing the Building Density will greatly inprove performance with limited graphical degradation.

VR: Ultimate Configuration for ULTRA Settings

OS: Windows 10 64 Bit Processor: Intel Core i7 CPU 4.0 GHz Memory: 32 GB RAM Graphics: NVidia 1080 GTX or higher (Latest Driver Version Required) Render Scale Factor: 1.50 Note: - This setting can be found under Settings/Virtual Reality Limit Frame Rate: VSync OFF Note: This setting can be found under Settings/Graphic Settings Oculus Rift or HTC Vive.

Note - Systems with less than the above configurations can also run Aerofly FS 2 in VR by reducing some graphic settings. Most reductions of graphic settings will not take away from your VR experience.

Note - If you experience flashing shadows while in VR, reducing the Shadow Quality to MEDIUM will reduce the distance that the building shadows are seen but not reduce the overall quality of the shadows rendered. This may improve your VR experience in Aerofly FS 2.

This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information
manual/graphics2.txt · Last modified: 2018/06/30 02:51 by jf